How to do when a Sliding Glass Door That Sticks

If your sliding glass door sticks, it may need a little maintenance. Here are the basic steps:
Remove the sliding door.
Vacuum the tracks.
Use hot, soapy water and a brush to clean the tracks.
Inspect the rollers, and replace them if damaged.
Lubricate the tracks.
Reinstall the doors, and adjust the rollers to the correct height.
Using excessive force to open doors may damage the door or its components, so it pays to be patient as you try these tips! Whether there’s debris in the track or your door has damaged rollers, Glass Doctor has the cure for sticky sliding doors. Below you’ll find more details about how to 1) properly remove a sliding glass door, 2) clean the tracks .
How to Remove a Sliding Glass Door
Before you begin, ask someone to help you. Glass doors are very heavy and fragile. The door may be ready to fall out of the track before you are ready to catch it! It’s smart to have some helping hands for this project.
Begin by locating the adjustment screw covers on the sides of the door, toward the bottom. You may need to pry off or unscrew the covers. Have someone hold the door before you continue the next few steps.
Use a screwdriver to adjust the rollers so they move away from the door, which will give you clearance to remove the door.
Center the door in the middle of the opening.
Stand on the inside while a helper slowly tilts the top edge of the door toward you. If you don’t have clearance, the top rollers need to be adjusted higher.
Gently remove the door and set it aside.
How to Clean a Sliding Glass Door Track
Once the door is removed, it’ll be a lot easier to thoroughly clean the tracks.
Use a vacuum to remove loose debris in the track.
Use a stiff brush with hot, soapy water to scrub the track.
Do the same with the top and bottom edge of the glass door.
Dry the track well with a clean rag.
Tsianfan industry has a team dedicated to providing you with the most cost effective solutions for design and manufacturing Glass transport Rack ,Slab Storage Rack .More info ,please click our website:slabrack.com